Radio Text
RT allows RDS stations to send text messages that appear on the display.
“Radio Text” appears on the display when radio text data is received.
1
Press OPTION when the input source is “TUNER”.
The option menu screen is displayed.
2
Use ui to select “Radio Text”, then press ENTER.
3
Use o p to select “On”, then press ENTER.
•While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
•If no text data is being broadcast, “NO TEXT DATA” is displayed.
Changing the tuning mode (Tune Mode)
You can change the mode for tuning into FM broadcasts. If you cannot
tune in automatically with “Auto” mode, then change the mode to
“Manual” and tune in manually.
1
Press OPTION when the input source is “TUNER”.
The option menu screen is displayed.
2
Use ui to select “Tune Mode”, then press ENTER.
3
Use o p to select tuning mode, then press ENTER.
Auto : Automatically search for and tune to a receivable radio
station.
Manual : Manually change the frequency one step at a time each
time the button is pressed.
Listening to preset stations
1
Use CH/PAGE df to select the desired preset channel.
%
•You can also select preset broadcast stations by pressing TUNER PRESET CH + or
TUNER PRESET CH – on the main unit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
