Denon AVR-X2000 - Manual Setup; Amp Assign

150
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
•If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage128, 129).
•“Manual Setup” can be used without changing the settings. Please set
if necessary.
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Select how to use the power amp.
Surround Back (Default) : Setting for 7.1-channel playback using
surround back speakers.
ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2
and output the audio in stereo.
Bi-AMP : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the front speakers A and B to be used for
playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting,
also perform the “Front Speaker Setup” (vpage 155)
procedure.
Front Height : Setting for 7.1-channel playback using front height
speakers.