2 Inputs
Setting items Description Page
Input Assign Changes input connector assignment.
137
Source Rename Changes the display name for input source.
139
Hide Sources Remove from the display input sources that are not used.
139
Source Level Adjusts the playback level of the audio input.
139
Input Select Sets the audio input mode and decode mode.
140
Input Mode Set the audio input modes for input sources.
140
Decode Mode Set the audio decode mode for input source.
140
2 Speakers
Setting items Description Page
Audyssey
®
Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum
settings are made automatically.
141
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
150
Amp Assign Select power amplifier usage method to match your speaker system.
150
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability.
151
Distances Set distance from listening position to speakers.
153
Levels Set the volume of the test tone to be the same when it is output from each speaker.
153
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer.
154
Bass Set subwoofer and LFE signal range playback.
155
Front Speaker Setup Set the front speaker A/B to use for every sound mode.
155
To Next Page
Loading...
Need help?
General
Weight and Dimensions
