Denon AVR-X2000 User Manual

118
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Network
Setting items Description Page
Information Display network information.
156
IP Control Enables network communication in standby power mode.
156
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name
according to your preferences.
156
Settings Make settings for wired LAN.
157
Diagnostics Used to check the network connection.
158
Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer.
159
2 General
Setting items Description Page
Language Sets the language for display the menu on the TV screen.
160
ZONE2 Setup Makes settings for audio playback with multi-zone (ZONE2).
160
Lch Level Adjust the left channel output level.
160
Rch Level Adjust the right channel output level.
160
Volume Level Set the volume output level.
160
Volume Limit Make a setting for maximum volume.
161
Power On Volume Define the volume setting that is active when the power is turned on.
161
Mute Level Set the amount of attenuation when muting is on.
161
Zone Rename Change the display title of each zone to one you prefer.
161
Quick Select Names Change the “Quick Select” display title to one you prefer.
161
Auto Standby Sets the time for switching to auto standby when there are no audio or video signals input into this unit.
162
Front Display Makes settings related to the display on this unit.
162

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g