Playback in ZONE2 (Separate room)
You can operate this unit to enjoy audio in a room (ZONE2) that is dierent from the room where this unit is placed (MAIN ZONE).
You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and
ZONE2.
Connecting ZONE2
You can use the following two methods to play back audio in ZONE2.
•Connection through the speaker output terminals (vpage110)
•Connection using an external amplifier (vpage111)
2 Connection 1 : Connection through the speaker
output terminals
•Set the “Assign Mode” (vpage 150) setting to “ZONE2”, and
outputs ZONE2 audio from SURROUND BACK speaker terminals
(The default setting is “Surround Back”).
•If you set the “Assign Mode” (vpage 150) setting to “ZONE2”,
the main zone home theater system can play back up to 5.1-channels.
Even if you play back audio recorded in 6.1 or 7.1-channels, this unit
automatically downmixes the audio to 5.1-channels.
ZONE2
w q w q
(L) (R)
MAIN ZONE
This unit
To Next Page
Loading...
Need help?
General
Weight and Dimensions
