Quick select function
You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons.
You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once.
By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.
Calling up the Quick Select
1
Press QUICK SELECT.
The Quick Select settings for the button you pressed are called up.
•The default settings of each Quick Select function are as shown below.
Button Input source Volume
QUICK SELECT 1 CBL/SAT 40
QUICK SELECT 2 Blu-ray 40
QUICK SELECT 3 GAME 40
QUICK SELECT 4 NETWORK 40
Changing the settings
1
Set the items below to the settings you want to save.
q Input source
z
(vpage42)
w Volume (vpage43)
e Sound mode (vpage94)
r Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®,
Audyssey Dynamic Volume®) (vpage128)
2
Press and hold the desired QUICK SELECT until “Quickz
Memory” appears on the display.
The current settings will be memorized.
z The number for the QUICK SELECT button you pressed is displayed.
2 Changing the Quick Select Name
You can change the Quick Select names displayed on the TV or unit of
this display to the desired names.
For the name change method, see “Quick Select Names”
(vpage161).