Denon AVR-X2000 - Setting the Slideshow Interval

91
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Setting the Slideshow Interval
Set the playback interval when playing back a slideshow of still image
(JPEG) files stored on a USB memory stick or media server, or on the
Flickr website.
n Supported input sources : USB / Media Server / Flickr
1
While the list is displayed, press OPTION.
The option menu screen is displayed.
2
Use ui to select “Slideshow Interval”, then press
ENTER.
3
Use o p to set the display time.
O : The slide show is not played back.
5s (Default) – 60s : Set the time for displaying a single picture when
playing back images in the slide show.
4
Press ENTER.
Displaying your desired video during
audio playback (Video Select)
This unit can display video from a dierent source on TV during audio
playback.
You can set this for each input source.
n Supported input sources : iPod/USB / CD
z
/ TUNER / NETWORK
z Available when none of HDMI, component video or video connector is
assigned.
1
Press OPTION during audio playback.
The option menu screen is displayed.
2
Use ui to select “Video Select”, then press ENTER.
3
Use o p to select the Video Select mode.
O (Default) : Disable Video Select mode.
On : Enable Video Select mode.
4
If you selected “On” in step 3, press i and select
“Source”.
5
Use o p to select the input source for video you want to
play back, and press ENTER.