Denon AVR-X2000 User Manual

116
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Video
Setting items Description Page
Picture Adjust Adjusts the video quality.
131
Picture Mode Select the desired picture mode according to the video content and your viewing environment.
131
Contrast Adjust picture contrast.
131
Brightness Adjust picture brightness.
131
Saturation Adjust picture chroma level (color saturation).
131
Hue Adjust green and red balance. Also called Tint.
131
Noise Reduction Reduce overall video noise.
132
Enhancer Emphasize picture sharpness.
132
HDMI Setup Makes settings for HDMI video/audio output.
132
Auto Lip Sync Make automatic compensation for timing shift in audio and video output.
132
HDMI Audio Out Select HDMI audio output device.
133
HDMI Pass Through Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode.
133
HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control.
133
Pass Through Source The AV receiver will “pass through” the sources HDMI signal when in standby.
133
Power O Control Links the power standby of this unit to external devices.
133
Output Settings Makes settings for video output.
134
Video Mode Make settings for video processing.
134
Video Conversion The input video signal is converted automatically in conjunction with the connected TV.
134
i/p Scaler Sets the video input signal for which i/p Scaler processing is performed.
134
Resolution Set the output resolution.
135
Progressive Mode Set an appropriate progressive conversion mode for the source video signal.
135
Aspect Ratio Set the aspect ratio for the video signals output to the HDMI.
135
On Screen Display Select the on-screen display user interface preferences.
136
Volume Sets where to display the master volume level.
136
Info Displays status of operation temporarily when the sound mode is changed, or input source is switched.
136
Now Playing Sets how long each menu is displayed when the input source is “NETWORK”, “iPod/USB”, or “TUNER”.
136
TV Format Set the video output signal format for the TV you are using.
136

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g