Denon AVR-X2000 - Page 138

138
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 / 6 / FRONT : Assign an HDMI input connector to the
selected input source.
– : Do not assign an HDMI input connector to the selected input source.
%
•When “HDMI Control” (vpage133) is set to “On”, HDMI input connector
cannot be assigned to “TV AUDIO”.
2 DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
OPT1 (Optical) / OPT2 :
Assign a digital audio input connector to the selected input source.
– : Do not assign a digital audio input connector to the selected input
source.
2 ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3 / 4 : Assign a analog audio input connector to the selected
input source.
– : Do not assign a analog audio input connector to the selected input
source.
2 COMP (Component video)
Set this to change the component video input connectors assigned to
the input sources.
COMP : Assign the component video input connector to the selected
input source.
– : Do not assign a component video input connector to the selected
input source.
2 VIDEO
Set this to change the composite video input connectors assigned to
the input sources.
1 / 2 : Assign the video input connector to the selected input source.
– : Do not assign a video input connector to the selected input source.
2 Set Defaults
The “Input Assign” settings are returned to the default settings.