ENGLISH
• Some functions may not
be
used under certain operating conditions, but this
is
not failure of the unit.
Read
the description
in
this Owner's Manual for details on correct operations.
• The volume may differ from disc to disc. This
is
due
to
the differences
in
how
the signals
are
recorded
on the disc and
is
not a malfunction.
• During programmed playback, it
is
not possible to perform random playback or to start playback from
a desired track or file.
• Some functions are prohibited on some discs.
I
Symptom
I
Cause / Countermeasure Page
I
:
No sound
or
the • Check the audio connections of connected devices and
11
-
20
sound
is
hard to speakers.
hear.
'Is
the power connected audio devices turned
on?
_.
Is
the input selection set to the input to which the
DBP-A
100
is
connected?
I
I
•
Is
the audio output properly selected?
13
- 20
The picture
freezes • If a disc
is
scratched or contaminated with fingerprints, the disc 6
momentarily during may not play correctly.
Clean
the disc or replace with a non-
playback. scratched disc.
• There may be a problem with the data recorded on the disc.
-
Playback does not
'Is
there condensation inside the player or on the disc? (Let it sit
3
,
start even when
~
is
for 1 to 2 hours with the power off.)
pressed, or starts but • When the disc is scratched or contaminated with fingerprints,
6
stops immediately.
the disc may not play correctly. Clean the disc or replace
with
a
non-scratched disc.
•
Is
the disc loaded upside-down?
Load
the disc properly, with the
6
side to be played face down.
'Is
an
unplayable disc loaded?
3,
4
Subtitles
are
not • Subtitles cannot be displayed for BD-Video, DVD-Video or DivX®
46
displayed. files that do not contain subtitles.
•
Is
the subtitle setting
"011"1
Use the disc menu or 00to set the
23
subtitles to display.
My
SO
Memory
Card
• The format of the card does not match this unit or the card is not
31
cannot be read.
compatible.
•
Is
the playback media mode set to
"SO
CARD
MODE"? 34
Select
"SO
CARD
MODE" with
(~l
No return to start-up
• There may
be
an
internal error. Set the power to standby, wait
-
screen when a disc
is
awhile. then turn the power back on.
removed.
The set cannot be • Aim the remote control directly at the infrared sensor
window
on 7
operated with the the front
of
the unit.
remote control. • Operate within a distance of 7 meters from the remote control
7
sensor.
• Remove any obstacles.
-
• Replace the batteries with new ones.
7
• Insert the batteries
in
the proper direction, checking the
EEl
and 7
e marks.
• Match the signal code of the remote control to the signal code 7
of
the unit.
The unit
is
operated
· by the remote control
lof
an
other DENON
product.
IButtons do not work
or the unit stops
responding.
A playable disc
is
not
· read.
The camera angle
does not switch.
Playback does not
start when a title
is
selected.
I have forgotten the
password for the
rating level.
• The unit
is
designed to be operated by the remote controls of
other DENON products.
•
To
avoid the unit being operated by the remote controls of other
devices, set "Other Setup" - "Remote Control Setting" - "Receive
Legacy Remocon" to
"Off"
on the
GUI
menu.
, • Operations may not be permitted by the disc. I
I
·
The
safety protection device may be activated. Unplug the power I
cord once, and wait for 5-10 seconds
and
then plug it
in
again.
• Refer to the instructions of the disc.
•
The
pickup lens may be dirty. Before requesting servicing, try
cleaning the laser pickup with a commercially available lens
cleaner. (Do not use a cleaner with a brush because it may
damage the lens.)
•
If
the multiple angles are not recorded
in
a BD-Video or DVD-
Video, the camera angle cannot be switched. Also, multiple
angles may only be recorded for specific scenes.
• Playback may
be
prohibited by the viewing restriction setting.
Check the "Ratings" setting on the
GUI
menu.
•
On
the
GUI
menu, perform the "Other Setup" - "Initialize"
procedure.
31
47
29
31
56
To Next Page
Loading...
Need help?
General
