Denso BHT-1600 - 4.3. USE BLUETOOTH

104
BHT-1600 Handy Terminal User Manual
4.3. USE BLUETOOTH
The BHT-1600 handy terminal lets you configure Bluetooth settings and manage Bluetooth
services provided on remote devices.
4.3.1. BLUETOOTH PROFILES
Bluetooth Profiles Supported
Generic Access Profile (GAP) For device discovery and authentication.
Service Discovery Access Profile (SDAP) Discovers services on remote devices.
Headset Profile (HSP)
Describes how a Bluetooth enabled headset should
communicate with a Bluetooth enabled device
Serial Port Profile (SPP) Sets up a virtual serial port to connect two Bluetooth
devices.
Human Interface Device Profile (HID) Provides a low latency Bluetooth connection with
keyboards, pointing devices, etc.
Object Push Profile (OPP) Pushes and pulls objects to and from a push server.
Hands-Free Profile (AG1.5) (HFP) Allows using a hands-free device to place and receive
calls.
Advanced Audio Distribution
Profile
(A2DP) Streams stereo-quality audio to a wireless headset or
speaker.
Audio/Video Remote Control
Profile
(AVRCP) Allows controlling of television and Hi-Fi equipment.
Generic Object Exchange Profile (GOEP) Provides a basis for other data profiles.
Personal Area Networking
Profile
(PAN)
Uses Bluetooth Network Encapsulation Protocol for
Bluetooth transmission.
General Audio/Video
Distribution Profile
(GAVDP) Provides a basis for A2DP and VDP.
Phone Book Access Profile (PBAP) Transfers Phone Book Objects to a car kit to display the
information of an incoming call received on the handy
terminal, or initiate a call.