Denso BHT-1600 - Date and Time; Set Date, Time and Time Zone

46
BHT-1600 Handy Terminal User Manual
2.5. DATE AND TIME
2.5.1. SET DATE, TIME AND TIME ZONE
By default, the handy terminal automatically synchronizes the date and time to the WWAN
network (if connected).
To set the date and time manually:
1) Tap All Apps | Settings | Date & time .
2) Tap Automatic date & time and select Off to disable using network-provided time.
3) Deselect Automatic time zone.
4) Tap Set date. Use the sliders to select the correct month, date and year. Tap OK to
save.
5) Tap Set time. Use the sliders to select the correct time. Tap OK to save.
6) Tap Select time zone. Select the correct time zone from the list.
Note:
Automatic time zone is not supported on Wi-Fi Only model.