Denso BHT-1600 - Page 172

160
BHT-1600 Handy Terminal User Manual
2D SYMBOLOGIES
Symbology Description Default
Aztec Disable
Aztec Switch to enable Aztec decoding. Disable
Data Matrix Enable
Data Matrix Switch to enable Data Matrix decoding. Enable
Decode Mirror Image Switch to enable decode mirror images.
Never
Does not decode Data Matrix barcodes that are
mirror images.
Always
Decodes Data Matrix barcodes
that are mirror
images.
Auto
Decodes both mirrored and unmirrored Data Matrix
barcodes.
Never
Separator Character
Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of
subsequent data fields in
concatenated data strings.
None
Maxicode Enable
MicroPDF417 Enable
MicroPDF417 Switch to enable MicroPDF417 decoding. Enable
Code 128 Emulation
Transmit data from certain Micro PDF 417 barcodes as
if it was encoded in Code 128 barcodes.
 Transmit AIM code ID character in Miscellaneous
options must be enabled first.
When applied, the MicroPDF417 barcodes are
transmitted with one of these prefixes:
The first codeword of MicroPDF417 is 903-905:
The original Code ID “]L3” will be changed to “]C1”.
The first codeword of MicroPDF417 is 908 or 909:
The original Code ID “]L4” will be changed to “]C2”.
Disable