14
g Call / Accept call
(corresponds to the function "Pick-up/Put-down recei-
ver")
or
Cancel programming procedure.
o Establish internal connection
or
Confirm programming (depending on status)
or
Link call numbers (Call-by-call).
w Redial key; press repeatedly to "page" through the
list of recently dialled numbers / Caller List
or
Enter a dial pause when storing speed-dial numbers
or
P (w) Depending on the status of your telephone,
pressing this key commences the Programming
mode
s Mute key (microphone off, "Mute")
or
Switches off the handset ringer for the current inco-
ming call (for that call only)
or
C (s) Depending on the status of your telephone,
pressing this key performs a deletion action ("Clear").
R Signal key (T-Net feature / When used on a PBX).
1… 0 Numerical keypad for dialling numbers.
*, # Special keys when using DTMF (dual-tone
multifrequency).
Acknowledgement signal
(programming successful):
Warning signal (entry error)/
Leaving radio range:
The readiness state of the handset is defined as follows:
- The batteries are charged,
- The handset is enrolled with a base station and within
range of that base station,
- No programming is currently being undertaken,
- No calls are currently incoming,
- The keypad is not locked.
Keys
Audio signals
Readiness
state
To Next Page
Loading...