7
Features Your BeeTel provides you with the following features. More
detailed information on each feature can be found in the
respective description.
• Standard dialling
• Connection set-up / Block dialling
• Redial / Caller List, 10 numbers in common list, max. 30
digits per number, selection of entry in Caller List through
prefixed "C"
• Display of Caller ID, if the number is transmitted (CLIP /
Calling Line Identification Presentation)*
• Speed dialling, 10 destination numbers
• Preselection / Call-by-call support (connection via nume-
rous network operators)
• Internal calls
• Display of internal Caller ID
• Single / Conference call option for internal calls
• Transfer of external calls (in the case of several hand-
sets)
• Consultation in the case of external calls
• Flash-key function with 2 flash intervals (long/short)
• Handset volume adjustable in two increments
• Handset mute function
• Ringer mute for incoming calls
• Key-click on/off
• Keypad lock
• Display of signal strength
• Display of call duration
• Display of battery charging level
Furthermore, the BeeTel voice offers the following additio-
nal features:
• Integrated digital answering machine
• Message recording capacity of up to 16 minutes
• 2 announcement texts
• Memo function
• Display of time stamp
• Possibility for remote control
• Toll-free distance request
• All messages and texts retained in the event of a power
shortage
• Toggling
• 9 on-hold melodies
* The CLIP feature must be supported by your subscriber terminal
connection. Your network operator (e.g. Deutsche Telekom) can inform
you of whether this feature is supported.
To Next Page