25
In the case of the BeeTel voice / voice XL, the date and
time are stored for each message received and are display-
ed when that message is played back.
Enter the following key sequence:P (w)R0.
Press 0.
Press 1.
Enter the date: two-digit entry of the day and two-digit entry
of the month (e.g. 3 May = 0305)
Press o.
Enter the time: two-digit entry of the hour and two-digit
entry of the minutes (e.g.: "quarter past nine" = 0915)
Press o and g.
You can choose between 9 different on-hold melodies.
These are played back to the caller who is on-hold if you
transfer a call ("On-Hold").
Enter the following key sequence:(w)R0.
Press 0.
Press 6.
Select melody: 1…9
Press o.
You can program various ringer melodies and volumes for
the base station ringer.
Enter the following key sequence:P (w)R0.
Press 0.
Press 7.
Select melody: 1…6
Select volume: 0 = very quiet; 7…9, *, #.
Press
o.
ABC D E FGHI
∫å‚™ †ø~ $§
ABC D E FGHI
ªø¬∂ !
ABC D E FGHI
01 01 00 00
Setting the
date/time
(BeeTel voice only)
On-hold melody
(BeeTel voice only)
Base station
melody/
volume
(BeeTel voice only)
To Next Page
Loading...