DETEWE BeeTel - Selecting a Base Station;Enrolling a Handset; Deleting a Base Station

27
Your handset must generally be enrolled with all base stations
with which it is to be used (see page 26). Operation is then
realised at the next closest base station in the radio field by
means of corresponding enrolment, either manually or auto-
matically (see below).
The number of the respective base station selected is display-
ed in the display of your BeeTel handset. When a call is not
currently in progress (Ready mode), your handset is able to
enrol itself automatically at the respective base station (depen-
ding on programming).
It is not possible to switch to the radio field of a different base
station during a call!
Please note the display and the acoustic warning of your
handset when entering the boundary area of a radio field.
When leaving the radio field, any call currently in progress is
terminated.
When arranging several base stations, you must be aware that
the greatest possible radio functionality is achieved when the
individual radio fields do not overlap, i.e. the distance between
the base stations should, depending on local conditions, amo-
unt to approx. 60 m in buildings and approx. 600 m outdoors.
Example: You want to use your handset both in the
office and at home. To this end (presupposing compati-
bility), your handset must be enrolled with both base
stations (see page 26). Enrolling the handset at the
desired operational base station is then performed via
the "Selecting a base station" procedure described
below.
Enter the following key sequence:P (w)R.
Press 4.
All base stations with which the
handset is enrolled are displayed.
Enter the number of the desired base station. Entering 0
results in automatic selection, i.e. the first available base
station is selected and immediate readiness established.
Enter the following key sequence:P (w)R.
Press 5.
All base stations with which the
handset is enrolled are displayed.
Enter the number of the desired base station. The last base
station with which the handset is still enrolled cannot be
deleted.
A BCD E FGHI
∂™¬ ! “ – – –
A BCD E FGHI
∫å‚™ = ! “ – – –
Selecting a base
station/Enrolling
a handset
Deleting a base
station
(not applicable
when automatic
selection is activa-
ted)