DETEWE BeeTel - Preselection (Dial Via Different Network Operators); Reset (Return to Factory Default Condition)

23
Storing a preselection number (network operator access
code) facilitates your use of the possibilities of the new
telephone market. A stored number is automatically prece-
ded with a "0", regardless of whether the number is selec-
ted manually or from a memory, e.g. Speed Dialling List,
Redial Stack, or Caller List.
Note: If you do not wish to dial via the stored preselec-
tion number (e.g. for international calls), store or dial
the number starting with the # key; in this case, the
preselection number is not selected.
Enter the following key sequence:P (w)R0.
Press 9.
Enter the preselection number or
press C (s) to delete digits.
Press o.
Note: The preselection function may not be used if
your BeeTel telephone is connected to a PBX. Storing a
preselection number in such an instance would result
in a faulty connection.
This procedure resets the following functions to their factory
defaults:
• Authorisation code,
• Blocked numbers,
• Preselection.
Enter the following key sequence:P (w)R0.
Press 0.
Press 8.
Press o.
Enter PIN.
Press o.
ABC D E FGHI
π⁄~
ABC D E FGHI
噂™†
ABC D E FGHI
=≠=!===
Preselection
Reset