## - Play back messages
## - During playback: skip forward one message
#* - During playback: skip to start of message;
Press repeatedly: skip back one message
#10 - Switch answering machine off
#11 - Switch answering machine on / Text 1
#12 - Switch answering machine on / Text 2
#21 - 16 minutes
#22 - 8 minutes
#5 - Delete all messages
#61PIN 0 - Remote control off
#621 - Distance request on
#620 - Distance request off
#7 0…9 - Number of rings before activation
#8PIN - Delete all texts
#90 - Record Memo *
#91 - Record Announcement text 1 *
#92 - Record Announcement text 2 *
* Recording is stopped by pressing
#
- Put down the receiver - Terminate remote access.
This function causes the answering machine to intercept calls
after the 5th ring, as long as no messages have been recorded.
However, as soon as a new message is available, the answe-
ring machine intercepts all subsequent calls after the 2nd ring.
The preconfigured recording time (page 33) is deactivated.
If you call your BeeTel voice in order to listen to any messages
on your answering machine via the remote control function, the
call is only intercepted after the 2nd ring if new messages have
been recorded and not yet played back (this also applies to a
recorded Memo). However, if your telephone rings more than
twice, you can terminate the connection before the answering
machine intercepts your call, and no charge is incurred.
- Enter the following key sequence:o#.
- Enter the numerical code 62
- Display of the current status.
0 = Distance request prohibited
1 = Distance request allowed
- Enter the desired number.
- Terminate the connection by pressing g.
ABC D E FGHI
∂⁄‚† ®™ !
36
Toll-free
distance
request
Activate/Deac-
tivate toll-free
distance request
To Next Page
Loading...