17
A previously stored number is deleted when the first digit is
entered. If you wish to perform the change or delete the
digits, press C (s), and repeat if necessary. If you wish to
also save a dialling pause, press w.
Quit save function:
Press o.
The telephone is ready.
Select Call number:
Press P (w) and the desired numerical key.
The call number stored in this
memory slot is now shown on the
display, e.g. Memory slot 1.
Selecting a different memory slot:
Press P (w) repeatedly
(the next memory slot is displayed, respectively)
or
Press a numerical key 0…9.
Dial Call number:
Press g drücken
or
Press o, in order to add another call number or to insert
individual digits.
Adding additional call number (e.g. Call-by-call):
Select another speed-dialling memory slot (see above); "P"
flashes in the display”
or
Select the call number from the Redial Stack/Caller List
(page 15); "P" flashes in the display
or
Add single digits
Dialling a call number:
Press g
or
ABCD E FGHI
=! =!(=%§§(§)§
Dial/Check
speed-dial
numbers
To Next Page
Loading...