DETEWE BeeTel - Transfer Without Announcement; Telephone in Ready State; Keypad Lock; Paging

20
Press g; the external call is now transferred to an internal
handset, and your handset is again ready.
You are engaged in an external call:
Press o.
Dial the desired internal call number
Press g; the external call is trans-
ferred to an internal handset and your handset is again
ready.
If the transferred call is not accepted, it is again announced
at your handset.
You can protect the keypad from unintentional activation /
dialling (e.g. during transportation). Calls can still be accep-
ted as usual. The keypad lock is also removed when pla-
cing the handset in the base station or a charging unit. If
you have "displaced" your handset or wish to transmit a
(previously agreed) signal, you can "page" the handset by
pressing the corresponding key on the base station. The
paging signal is transmitted to all handsets enrolled on the
respective base station.
To activate/deactivate the keypad lock:
Press P (w) *,
The following symbol appears on the
display:
To page all available handsets:
(BeeTel / BeeTel XL):
Simultaneously press both keys on the base station for at
least 4 seconds; the ringer signal on all handsets enrolled
at this base station and available will now sound.
(BeeTel voice / BeeTel voice XL):
Please press the left key in order to page the handset, if
the answering machine is in idle mode (i.e. messages are
not being played). Pressing the left key again deactivates
the paging signal.
A BCDEFGHI
––––––––
ABCDEFGHI
!~†§
Transfer without
announcement
Telephone in
ready state
Keypad lock
Paging
(not included with
the model with the
small base)