35
- Enter the desired number.
- Terminate the connection by pressing g.
You can specify whether or not you wish to allow remote
access to the answering machine. In order to use the remote
control, "DTMF" signals are required (telephone with dual-
tone multifrequency dialling or a code transmitter).
If remote access is prohibited, it is not possible to access
any of the answering machine functions remotely; the
answering machine can only be operated "locally" in this
context, i.e. via the keys on the base station or via the hand-
set. If, however, you have allowed remote access, you can
perform all functions specified in the following chapter
"Remote control" on a remote basis.
- Enter the following key sequence:o#.
- Enter the numerical code 61
- Enter PIN and press o.
- Display of the current status.
0 = Remote control prohibited
1 = Remote control allowed
- Enter the desired number.
- Terminate the connection by pressing g.
In order to operate your answering machine remotely, so-
called "DTMF" signals are required (telephone with dual-tone
multifrequency dialling or a code transmitter). Please note
that a maximum of 20 second are available between the
entry of each individual number. If you do not enter the
requisite number within this time, the connection is termina-
ted.
• If your answering machine is switched on, you will hear the
announcement text. Interrupt this by entering "0". Your
entry will be acknowledged by 3 audible beeps. Enter the
PIN within 8 seconds of hearing this signal. Then select a
function from the following table:
• If your answering machine is switched off, your call will be
accepted after approx. 1 minute and you will hear a multi-
ple signal sequence. Enter the PIN within 8 seconds of
hearing this signal. Then select a function from the follo-
wing table:
ABC D E FGHI
∂⁄‚† !
ABC D E FGHI
π⁄~
Allow/prohibit
remote
control
Remote
control
To Next Page
Loading...