19
You can perform various functions during a call.
You can deactivate (mute) the microphone, in order to dis-
cuss something in the room without the caller being able to
overhear you. Pressing the mute key a second time swit-
ches the microphone back on.
Press s,
The Mute symbol appears on the
display.
Press s again,
The mute symbol disappears.
You can adjust the handset speaker volume in two incre-
ments (loud / normal). A single press of the respective key
switches between the two settings. The setting selected is
stored even when the telephone is switched off.
To change the speaker volume:
Press P (w) #.
If an external call is received while you are already enga-
ged in a call, this is indicated by the call-waiting signal in
the handset. If you then quit the current call, the waiting call
is signalled on the handset a short time later and you can
accept it by pressing g.
If several handsets are enrolled on your base station and
currently in operation, you can put an incoming external call
on hold and establish an internal call, allowing you to "togg-
le" between the callers or transfer the external call to ano-
ther handset.
You are engaged in an external call:
Press o.
Dial the desired internal call number.
Consultation call.
Press o again; this reconnects you to the external call.
You can now toggle back and forth between callers with the
o key, without the separate callers being able to hear one
another.
ABCDEFGHI
!~†§
ABCDEFGHI
ABCDE FGHI
During a call
Mute
microphone
Microphone off
Microphone on
Speaker volume
Call waiting
Consultation/
Transfer with
announcement
Toggle
(BeeTel voice only)
To Next Page
Loading...