Deutz 1012 - Page 111

ENGLISCH • Kapitel 9 • Seite 7
9
9.1 Engine Specifications and Settings Technical Specifications
Model 1013 FC ------------------------------------- BF4M 1013 FC ------------ BF6M 1013 FC ----------------------------------
Cooling system ---------------------------------------------- Liquid-cooled/Cooling system protection --------------------------
Coolant quantity
1013 FC
5)
[litres approx.] -------------------------------------------- 7.2 ---------------------------9.8 -----------------------------------------
Permissible continuous coolant temperature
Engine outlet, with performance group I [°C] -------------------- with hinged-type charger (turbocharger) max.110
6)
./ with fixed charger (turbocharger) max.105
6)
. ----
Engine outlet, with performance group II-IV [°C] -------------------- with hinged-type charger (turbocharger) + with fixed charger (turbocharger max.105
6)
. ---
Thermostat initial opening at [°C] ------------------------------------------------------------ 87 . --------------------------------------------------------
Thermostat full open temperature [°C] ----------------------------------------------------------- 102 . --------------------------------------------------------
Coolant prewarming -------------------------------------------------------------
(4
. ---------------------------------------------------------
Coolant pump
Delivery pressure in [Pa/bar] -------------------------------------------------------------
7)
. ---------------------------------------------------------
Delivery rate in [m
3
/h] -------------------------------------------------------------
7)
. ---------------------------------------------------------
Power consumption in [kW] -------------------------------------------------------------
7)
. ---------------------------------------------------------
Lubrication -------------------------------------------------forced-feed lubrication ---------------------------------------------
Oil temperature in oil pan [°C] --------------------------------------------------------- max. 125 -----------------------------------------------------
Min. oil pressure with engine warm (120°C and
SAE oil 15 W 40) and low idle speed [kPA/[bar] ---------------------------------------------------------- 800/0.8 ------------------------------------------------------
Oil capacity (first fill-up) without filter [litres approx.] ------------------------------------------- 16
3)
. ------------------------ 28
3)
. ---------------------------------------
Oil capacity (first fill-up) with filter [litres approx.] ------------------------------------------- 17
3)
. ------------------------ 29
3)
. ---------------------------------------
3)
Approximate figures can vary depending on the design. The upper marking on the dipstick is always the maximum.
4)
Only during winter (see 3.5.1)
5)
Only engine capacity without radiator. Capacity of external cooling system dependent on cooling system design.
6)
Other performance groups have different values. Please contact company headquarters.
7)
Please contact company headquarters (varies depending on engine design)
9682en_k09.p65 07.08.2008, 09:527