Micronics C400 System Board Manual
55
HDD Low Level Format
Diamond recommends that only trained technicians use this
utility. This selection allows you to perform a low level
format of your hard disk drive. To select the HDD LOW
LEVEL FORMAT option, highlight this option on the main
menu screen and press <ENTER>.
Figure 4:10: HDD Low Level Format Screen
The selections available are: Low Level Format Utility,
Select Drive Bad Track List and Preformat.
WARNING: This utility should not be run on an IDE or EIDE
hard drive unless the manufacturer of the hard drive instructs
you to do so.
Chapter 4: The BIOS Setup Utility
To Next Page
Loading...
Need help?
General