Micronics C400 System Board Manual
Save and Exit Setup
This selection saves the changes you have made in the
setup program, then exits and reboots the system. After
making all modifications in the setup program, exit to the
main menu screen. Highlight the SAVE AND EXIT SETUP
option and press <ENTER>. Press <Y> to confirm the
changes made and <N> or <ESC> if additional modifi-
cations are needed before exiting the setup program.
Exit Without Saving
This selection abandons all previous settings, then exits
and reboots the system. From the main menu screen
highlight the EXIT WITHOUT SAVING option and press
<ENTER>. Press <Y> and the system will exit the setup
program, then reboot without saving any of the changes
made.
Chapter 4: The BIOS Setup Utility
56
To Next Page
Loading...
Need help?
General