Micronics C400 System Board Manual
6
Features
The Micronics C400 includes the following features:
▲ Single Intel Slot 1
for: -
Intel Celeron
233-333MHz (66MHz FSB)
Intel Pentium
II 350-450MHz (100MHz FSB)
▲ Intel 440BX AGPset
Intel PIIX4e
▲ One AGP slot
Four 32-bit PCI slots
One shared PCI/ISA slot
One 16-bit ISA slot
▲ Bus Speed - 66 and 100MHz
▲ Three 3.3V unbuffered 64/72-bit 168-pin DIMM sockets
Maximum memory - 768MB for SDRAM (PC-100Mhz
supported)
ECC support via chipset
▲ Hardware Management - microprocessor system hardware
monitor w/ CPU and chassis fan temperature sensors
▲ Ultra DMA/33 IDE support
▲ Mini ATX form factor
Introduction
To Next Page
Loading...
Need help?
General