OPERATOR’S MANUAL
PM200, 200E and 250 Planter Monitors
11001-1444-200702
INTRODUCTION / 5
SPECIFICATIONS
KEY FUNCTIONS
ON/OFF
The On/Off key powers the unit on and off. During power up, the monitor
performs internal self-tests, illuminates the display, sounds the alarm, and
determines which sensors are connected to the system. Pressing and
holding the key for one second when the power is ON will turn the power
OFF, independent of the screen being displayed.
ENTER
From the Main Operate screen, pressing the Enter key displays the
selected function line input screen. Also, the Enter key selects a highlighted
item for data modification. After changing the parameter values, Enter
accepts the modified data.
Power 10–16 VDC, 5 A fused (2A nominal)
Operating temperature range -20°C to 70°C (-4°F to 158°F)
Storage temperature range -40°C to 85°C (-40°F to 185°F)
Size 19.0 cm W x 11.9 cm H x 6.3 cm D
(7.5" W x 4.7" H x 2.5" D)
Weight 3.0 lbs
*Weight includes console and attached
cables (battery power cable and signal
cable that extends to the drawbar).
Wire Harnesses The PM200, 200E, and 250 include
integrated harnesses to supply the unit's
power (fused), ground speed input, and
sensor inputs (to drawbar). The connectors
are compatible with existing DICKEY-john
harnesses. DICKEY-john can supply
custom harnesses required for sensor
inputs.
Sensors Compatible with existing DICKEY-john
sensors
Standard mounting Rear attached horizontal mounting bracket
Mounting bracket weighs 1.0 lb.
Optional mounting Three-axis adjustable mounting bracket
Contrast adjustment Automatic temperature compensation for
contrast
Backlight adjustment Three settings for full sun, daytime, or
nighttime use
Compliant with EU directive 2000/2/EC
Dust and moisture resistant
To Next Page
Loading...
