Digi XBee

AT commands I/O settings commands
XBee/XBee-PRO® S2C ZigBee® RF Module
241
Parameter Description
3 Monitored digital input
4 Digital output low
5 Digital output high
Default
1
P4 (DIO14/DIN)
Set or read the function for DIO14.
Parameter range
0, 1, 3 - 5
Parameter Description
0 Unmonitored digital input
1 Data in for UART
3 Digital input
4 Digital output low
5 Digital output high
Default
1
P5 (DIO15/SPI_MISO)
The DIO15/SPI_MISO pin configuration (pin 17). This only applies to surface-mount devices.
Parameter range
0, 1
Parameter Description
0 Unmonitored digital input
1 Output from SPI port
Default
1
P6 (SPI_MOSI Configuration)
The DIO16/SPI_MOSI pin configuration (pin 16). This only applies to surface-mount devices.