Digi XBee User Manual

Manufacturing information
XBee/XBee-PRO® S2C ZigBee® RF Module
299
Manufacturing information
The surface-mount XBee/XBee-PRO ZigBee RF Module is designed for surface-mount on the OEM PCB.
It has castellated pads to allow for easy solder attach inspection. The pads are all located on the edge
of the device so there are no hidden solder joints on these devices.
Recommended solder reflow cycle 300
Recommended footprint 300
Flux and cleaning 302
Reworking 302

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm