Digi XBee User Manual

API Operation Frame descriptions
XBee/XBee-PRO® S2C ZigBee® RF Module
205
Many-to-One Route Request Indicator - 0xA3
Description
The many-to-one route request indicator frame is sent out the serial port when a many-to-one route
request is received.
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
Frame data
fields Offset Description
Frame type 3 0xA3
64-bit source
(remote)
address
4-11 MSB first, LSB last. The 64-bit address of the device that sent the many-to-
one route request.
Source
16-bit address
12-13 MSB first, LSB last. The 16-bit address of the device that initiated the
many-to-one route request.
Reserved 14
Set to 0.
Example
Suppose a device with a 64-bit address of 0x0013A200 40401122 and 16-bit address of 0x0000 sends a
many-to-one route request. All remote routers operating in API mode that receive the many-to-one
broadcast send the following example API frame out their serial port.
Frame data fields Offset Example
Start delimiter 0 0x7E
Length MSB 1 0x00
LSB 2 0x0C
Frame type 3 0xA3

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm