Digi XBee

Regulatory information South Korea
XBee/XBee-PRO® S2C ZigBee® RF Module
291
South Korea
The low-power XBee S2C TH and XBee S2C devices have received South Korean approvals. To show
conformity to the certificate, you must add a label with the South Korean product information to the
XBee S2C ZigBee RF Module.
For the through-hole device, you can place the label on the reverse side.
Recommended label material: Abraham Technical (700342) MFG P/N TAAE-014250.
The label size is: 15.9 mm x 15.9 mm (0.625 in x 0.625 in)
The complete label information is as follows:
The KCC logo must be at least 5 mm tall.
The text shown in the label is:
1. 모 델 명 : XBee S2C TH
2. 인 증 번 호 : MSIP-CRM-DIG-XBee-S2C-TH
3. 인 증 자 상 호 : DIGI INTERNATIONAL, INC.
4. 제 조 자 /제 조 국 가 : DIGI INTERNATIONAL, INC. / 미 국
If the label size does not accommodate the required content, you can use abbreviated information, as
follows: