Digi XBee User Manual

API Operation Frame descriptions
XBee/XBee-PRO® S2C ZigBee® RF Module
189
Node Identification Indicator frame - 0x95
Description
A device receives this frame when:
n it transmits a node identification message to identify itself
n AO = 0
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
Frame data
fields Offset Description
Frame type 3 0x95
64-bit source
address
4-11
MSB first, LSB last. The sender's 64-bit address.
16-bit source
network
address
12-13 MSB first, LSB last. The sender's 16-bit address.
Receive options
14
0x01 = Packet acknowledged
0x02 = Packet was a broadcast packet
Source 16-bit
address
15-16
Set to the 16-bit network address of the remote device. Set to 0xFFFE if
unknown.
64-bit network
address
17-24 Indicates the 64-bit address of the remote device that transmitted the
Node Identification Indicator frame.
NI string
25-26 Node identifier string on the remote device. The NI string is terminated
with a NULL byte (0x00).
Device type
29
0 = Coordinator
1 = Router
2 = End Device
Source event
30
1 = Frame sent by node identification pushbutton event (see D0
(AD0/DIO0 Configuration))
2 = Frame sent after joining event occurred (see JN (Join Notification)).
3 = Frame sent after power cycle event occurred (see JN (Join
Notification)).
Digi Profile ID
31-32 Set to Digi’s application profile ID.
Digi
Manufacturer
ID
33-34 Set to Digi’s Manufacturer ID.

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm