Digital Projection Insight Laser 4K - LIGHT ON;OFF Button; Indicators

INSIGHT 4K LASER User Manual
6.2.5. LIGHT ON/OFF button
Indicator condition Projector condition Note
Off The light source is off. -
Steady light Green The light source is on. -
6.2.6. Indicators
1. LIGHT status indicator
Indicator condition Projector condition Note
Off The light source is off. -
Steady light The light source is on. -
2. SYSTEM status indicator
Indicator condition Projector condition Note
Off Main power is off. -
Blinking light Green The projector is getting ready to turn on.
The douser is closed.
The light source is off.
Wait for a moment.
Orange The projector is cooling down. Wait for a moment.
Red (With buzzer) Safety problem, error. An error message is displayed in
the LCD screen.
Check the content of the error.
Red (Without buzzer) Error with possible image project under certain
conditions.
Steady light Green The projector is turned on. -
Orange The projector is in standby. -
Red Error at a level with not affect on projection. An error message is displayed in
the LCD screen.
Check the content of the error.
Page 54 of 65