INSIGHT 4K LASER User Manual
4.1.3. How to enter alphanumeric characters
Alphanumeric characters are entered for items, such as the log file of the specified period is written to USB memory. (See page 66)
Characters can be entered by pressing numeric buttons on the control panel on this projector.
Move right and left
Delete entered characters
Enter characters
Characters can be entered by pressing each button as shown in the following table. To delete a
character during entry, press the DOWN button.
[Example of Entry]
To enter “XGA” for example, use the following procedure:
(1)
Press the “8” button three times.
V → W → X
(2) Press the RIGHT button.
(3)
Press the “3” button. XG
(4) Press the RIGHT button.
(5)
Press the “1” button. XGA
Entered character
1
A → B → C → 1 → a → b → c → ! →
2
D → E → F → 2 → d → e → f → “ →
3
G → H → I → 3 → g → h → i → # →
4
J → K → L → 4 → j → k → l → $ →
5
M → N → O → 5 → m → n → o → % →
6
P → Q → R → 6 → p → q → r → & →
7
S → T → U → 7 → s → t → u → ’ →
8
V → W → X → 8 → v → w → x → ( →
LIGHT
Y → Z → / → 9 → y → z → ? → ) →
IMB
* → , → . → 0 → ; → : → + → - →
To Next Page
Loading...
Need help?
General
