The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
66
424
Time to block the keys in stopped posi! on
Possible Settings
from 1 to 127 : Seconds to block the Keyboard when the taximeter pass from Hired -> Stopped
+128 : At any key pressure show the word BLOC
+256 : During the Keys block the F1 key is exclude (it will continue to operate)
+512 : During the Keys block the F2 key is exclude (it will continue to operate)
+1024 : During the Keys block the F3 key is exclude (it will continue to operate)
+2048 : During the Keys block the F4 key is exclude (it will continue to operate)
+4096 : During the Keys block the F5 key is exclude (it will continue to operate)
+8192 : Special condition. The time counting start from the beginning of the receipt printing, then the taximeter go to For-Hire and
keep freeze the amount on the display while d’ont expire the time programmed. Also is not possible start a new trip while
d’expire the time programmed.
+16384 : At the time expire the taximeter go automatically to For Hire position.
0-65535
425
Tip Arround or increment
Possible Settings
0 = Disabled
1 ->255 = Cents to Arround the Fare with F2 in Stopped
+256->65535 = Amount/256 to increase the Tip with F3 in Stopped (Amount/256)x10) to increase the Tip with F4 in Stopped During
the Tip F5 Clear the Tip amount
0-65535
from Q 426 / Available for any custom parameter / to Q 429
To Next Page
Loading...