Operating Instructions RF-2000
63
7.2.4 Controlling the RF-2000 via GynkoSoft
Controlling the RF-2000 via the GynkoSoft data system is also possible. The device
driver for the RF-2000 must be installed. The sensitivity can be set to "Low" (default)
and "High" in GynkoSoft. The setting "Medium" is not supported by GynkoSoft.
GynkoSoft supports RF-2000 functions with the exception of the spectra scan
commands, this type of data cannot be recorded or output via GynkoSoft.
To Next Page
Loading...
