16
© 2015 Directed. All rights reserved.
Note: The Control Center LED will flash and the siren will chirp the number of times equal to the
option chosen.
Once a feature is programmed:
• Other features can be programmed within the same menu.
• Another menu can be selected.
• The Learn Routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the Control Center button the number of times necessary to advance from the feature
you just programmed to the next one you want to program.
2. Then press the Control Center button once more and hold it.
To select another menu:
1. Press and hold the Control Center button.
2. After three seconds, the unit advances to the next menu and the siren chirps, indicating which menu has
been accessed.
The learn routine exits if any of the following occurs:
• The open door is closed.
• The ignition is turned On.
• There is no activity for 30 seconds.
• The Control Center button is pressed too many times.
To Next Page
Loading...
