1 Getting Started AIM User’s Manual
11
Standby Mode
You can place your AIM in a power-saving state called Standby mode. Standby
mode lets you turn off the AIM display and other features to extend the charge of
the battery. You can quickly exit Standby mode and resume working on the screen
where you left off.
To enter Standby mode:
1 Press and hold the POWER button until the SHUT DOWN AIM screen appears.
2 Use
c or d to highlight Standby and press OK.
The meter enters Standby mode.
To exit Standby mode:
Press the POWER button.
Restart
To restart the AIM:
1 Press and hold the POWER button until the SHUT DOWN AIM screen appears.
2 Use c or d to highlight Restart and press OK.
The meter turns off, and then automatically turns back on.
Power-Off
To turn off the AIM:
1 Press and hold the POWER button until the SHUT DOWN AIM screen appears.
2 Use c or d to highlight Shutdown and press OK.
The meter turns off.
Tip: You have 3 seconds to make a selection on
the SHUT DOWN AIM screen before the meter
automatically turns off.
To Next Page
Loading...
Need help?
General
