2 Setting Up the Meter AIM User’s Manual
24
Changing Volume Setting
You can change the volume setting for your AIM.
To change the volume settings:
1 Press CONFIG to go to the CONFIGURATION screen.
2 Use
c or d to highlight Settings and press SELECT to go to the SETTINGS
screen, which shows the current settings for the meter.
3 Use c or d to highlight Volume and press SELECT to go to the VOLUME
screen.
4 Use e or f to select the desired volume setting. To turn on or off the tone that
sounds each time a key is pressed, press KEYBEEP ON / OFF.
5 Press ENTER to return to the SETTINGS screen.
Tip: You can temporarily turn on or turn off the
meter sound by pressing MUTE. You also can
press Fn to quickly adjust the volume setting.
To Next Page
Loading...