DirecTV Advanced Installation Meter - Setting Up a Job

2 Setting Up the Meter AIM User’s Manual
23
5 Use the alphanumeric keypad to enter the ID, name, phone number or company.
6 Press ENTER to save and return to the REGISTRATION screen.
7 Repeat Step 4 through Step 6 for each item on the REGISTRATION screen.
8 When you have finished entering registration information, press DONE to return
to the SETTINGS screen.
Note: To delete a character, press the Back
button. You also can use e or f to navigate
within your entry, or press CLEAR to delete the
entry and start over. Press CANCEL to exit
without saving changes.
Tip: To enter only numbers, press NUMERIC. To
enter letters and numbers, press ALPHA. To
enter capital letters, continue pressing the letter
button until the capital letter appears.
Tip: To enter a space or a special character
(such as -, #, &, or +), press the “1” button
repeatedly until the space or character you
want to enter appears.