6 Performing Other Network Tests AIM User’s Manual
53
Performing a Satellite Tune Test
You can use the AIM’s Satellite Tune feature to tune to any DIRECTV transponder.
Connecting the AIM in different locations in the distribution network, you can
progressively test each segment of the connection between the ODU and the IRD to
locate a problem.
To perform a Satellite Tune test:
1 Start the job for the installation (“Starting a Job” on page31).
2 From the HOME screen, press TEST to go to the TEST screen.
3 Use c or d to highlight Satellite Tune and press SELECT to go to the
SAT TUNE screen.
4 Use c or d to highlight the equipment configuration for the installation and
press SELECT to continue.
To Next Page
Loading...
Need help?
General
