7 Managing Records AIM User’s Manual
67
Setup Records
A setup record is generated each time the setup information is updated for the
account or an EIV or Transponder Survey is performed. This record shows the new
setup information (including ODU, switch, and zip code), as well as the time and
date when the change was made or the test was performed.
User Records
A user record is generated each time the registration information is updated for the
AIM or an EIV or Transponder Survey is performed. This record shows the
registration information (installer name, phone, and company), as well as the time
and date when the change was made or the test was performed.
Test Records
A test record is generated each time an EIV or Transponder Survey is performed.
This record shows summary information about the test, including the time and date,
ODU and equipment configuration for the installation, the location where the test
was performed, the account number, and notes (if applicable). One example is
shown.
To Next Page
Loading...
Need help?
General
