DirecTV Advanced Installation Meter 2 User Manual

innovative technology to keep you a step ahead
Copyright © 2017 Trilithic, Inc. All Rights Reserved - 122117-REV1
Specications are subject to change without notice. Please contact your sales representative for further information.
Advanced Installation Meter 2
Operation Manual

DirecTV Advanced Installation Meter 2 Specifications

General

Brand	DirecTV
Model	Advanced Installation Meter 2
Category	Measuring Instruments
Language	English

Summary

Getting to Know Your AIM Meter

Powering and Managing the AIM Meter

Instructions on powering on/off, standby mode, restart, and battery management.

Installing an ODU

ODU Installation Task Guide

Task A: Installation Setup

Task B & C: Coarse Alignment

Adjusting ODU azimuth and elevation for initial signal lock.

Task D: Tilt Adjustment

Adjusting ODU tilt for optimal signal.

Task E: Fine Elevation Adjustment

Fine-tuning ODU elevation for optimal signal.

Task F: Fine Azimuth Adjustment

Fine-tuning ODU azimuth for optimal signal.

Performing Post-Alignment EIV

Running Extended Installation Verification after ODU alignment.

Performing Other Network Tests

Guided Mode Troubleshooting

Step-by-step guided tests to identify equipment failures.

EIV Plus Testing

Performing EIV Plus tests for detailed analysis and troubleshooting.

Satellite Tune Test

Transponder Survey

Cable Resistance Test

Testing cable integrity by measuring resistance with a test load.

In-Line Test

Measuring voltage, current, and tone signals in the coaxial cable.

SWiM LF Power Test

SWiM Channel Assignments Test

Updating the AIM Meter

Meter Firmware Update

How to update meter firmware via Internet or USB.

Update Firmware from Internet

Steps to download and install firmware updates via Ethernet or Wi-Fi.

Update Firmware from USB Drive

Steps to load firmware updates from a USB flash drive.