Page 103
AIM 2 Operation Manual
Transferring records from a USB ash drive to the AIM
1. Insert the USB ash drive in the appropriate
USB connector on the meter.
2. Press CONFIG to go to the
CONFIGURATION screen.
3. Highlight Records and press SELECT to go
to the RECORDS MAIN screen.
4. Highlight Transfer Records from USB and
press SELECT to go to the TRANSFER
RECORDS FROM USB screen. Then
highlight one of the following options:
• To copy an individual record, highlight
Select Individual Record and press
SELECT. Highlight the record to copy
and press SELECT.
• To copy all records from the USB
drive, highlight Copy All Records
and press SELECT.
• To copy all records of a selected type
from the USB drive, highlight the
type of records to copy and press
SELECT.
5. On the message that appears to conrm your transfer, press OK.
6. The records are transferred to the AIM, and the RECORDS MAIN or TRANSFER
RECORDS FROM USB screen appears.
You also can view, move, or delete an individual record from
the Options screen. Press OPTIONS, highlight the desired
option, and press OK.
To Next Page
Loading...
Need help?
General
