Page 27
AIM 2 Operation Manual
Setting Up the Meter
Chapter 4
Overview
Before you use your AIM, you should enter registration information, including your ID, name,
phone number, and company. You also should review the meter’s settings. You can change the
following settings:
• Wi-Fi
• Bluetooth
• Ethernet
• Volume
• Display contrast and brightness
• Time and date, including format
• Time limits for automatically turning off the display backlight, entering Standby mode,
and turning off the meter
To quickly adjust the setting for display contrast, display
brightness, or volume, you can press Function from any
screen.
On the UTILITIES window, use the up/down arrow buttons to
highlight the setting you want to change, then use right/left
arrow buttons to select the new level. Press Fuction to exit.
To Next Page
Loading...
Need help?
General
