Page 38
AIM 2 Operation Manual
Changing the Volume Settings
1. Press CONFIG to go to the CONFIGURATION screen.
2. Select Settings and press SELECT to go to the
SETTINGS screen.
3. Select Volume and press SELECT to go to the
VOLUME screen.
4. Use the up/down arrow buttons to select the
desired volume setting.
To turn on or off the tone that sounds each time
a key is pressed, press the KEYBEEP ON /
OFF softkey.
5. When nished, press the ENTER softkey to
return to the SETTINGS screen.
You can temporarily turn on or turn off the meter sound by
pressing MUTE. You also can press Function to quickly adjust
the volume setting.
To Next Page
Loading...