Page 39
AIM 2 Operation Manual
Changing the Display Contrast or Brightness
1. Press CONFIG to go to the CONFIGURATION screen.
2. Select Settings and press SELECT to go to the
SETTINGS screen.
3. Select Contrast or Brightness and press
SELECT to go to the respective screen.
4. Use the left/right arrow buttons to select the
desired setting.
To turn on or off the tone that sounds each time
a key is pressed, press the KEYBEEP ON /
OFF softkey.
5. When nished, press the ENTER softkey to
return to the SETTINGS screen.
You can press Function to quickly adjust the display contrast
or display brightness settings.
To Next Page
Loading...