2 Setting Up the Meter AIM User’s Manual
22
Entering Registration Information
Before you use your AIM, you should enter registration information in the meter,
including your name, ID, phone number, and company.
To enter registration information:
1 Press CONFIG to go to the CONFIGURATION screen.
2 Use
c or d to highlight Settings and press SELECT to go to the SETTINGS
screen.
3 Use c or d to highlight Registration and press SELECT to go to the
REGISTRATION screen.
4 Use c or d to highlight the item you want to enter (ID, Name, Phone, or
Company). Then press SELECT to go to the entry screen.
To Next Page
Loading...