1 Getting Started AIM User’s Manual
4
Chapter 6: Performing Other Network Tests, starting on page50.
If there is a problem with a DIRECTV installation, you can run network tests to
help you troubleshoot the problem. This chapter provides instructions for
performing tests including the In-line test, Satellite Tune test, SWiM LF Power
test, Cable Resistance test, and Transponder Survey.
Chapter 7: Managing Records, starting on page65.
The AIM stores information for each account, including setup information and
test results. This chapter provides instructions for how to view records, delete
records, and transfer records to or from the AIM using a USB flash drive.
Chapter 8: Updating the Meter, starting on page77.
You can update the AIM as new features become available. This chapter provides
instructions for updating the meter’s firmware.
Conventions
The following conventions are used in this manual to help guide you through the
features of the AIM:
Each screen is referenced by the name that appears in the title bar.
Words that appear on the screen (titles, on-screen options and softkey labels)
are shown in bold.
The instructions describe how to navigate through the AIM’s features using the
meter’s softkey buttons. However, you also can use other meter buttons for
navigation (including the arrow buttons, alphanumeric buttons, and OK button).
For more information, see page9.
To make instructions easy to read, buttons are referenced only by their label.
For example:
Press NEXT to continue.
To Next Page
Loading...
Need help?
General
